I make the full range of aluminium / alloy tanks to suit the Aston Martin range. These are of the highest quality and are at sensible prices. Please enquire for details. These are all made by myself, and like all of my products, I ensure that they are correct. 

I have also supplied these tanks to a number of Aston Martin Heritage Specialists both in the UK, Europe and USA. I have also supplied tanks to Australia and Japan to name but a few.  

Should you be interested in a fuel / petrol / gas tank to suit a model of Aston Martin not listed here, please contact for details.

 

Aston Martin DB Mark lll tank.

DB3 2

These three pictures show the Aston Martin DBlll tank that I make.

It is a straight swap for the standard steel tank and the best quality that you will find.

DB3 4

The sender unit mount and the two fuel mounts shown below are machined fittings welded in place on the inside. They come complete with stainless steel Allen headed bolts and washers, and a new gasket for the sender unit mount.

The underside of the baffled tank is correctly shaped as per the original tank and has the drain plug in the correct position.  

 

DB3 6

The pictures here clearly show the quality of the welding and manufacture.

Price:   £POA (No vat to pay).

 

Aston Martin DB4 Zagato tank

Aston Martin DB4 zagato 1 resized

A fully baffled replacement tank to suit the DB4 Zagato. This tank was made to the customers specification having welded in baffles instead of bolted in baffles. 

Price:   POA (No vat to pay).

Aston Martin DB4 tank

Aston Martin DB4 tank 1 resized

These three pictures show the Aston Martin DB4 tank that I make.

It is a straight swap for the standard steel tank and the best quality that you will find.

Aston Martin DB4 tank 2 resized

This picture shows the sender unit mount and fuel feed mount. Both of these are machined mounts which are welded in place on the inside, and they will not leak. The sender unit mount comes complete with x6 stainless steel allen headed retaining bolts and washers, and a new gasket. The fuel feed mount has x2 of the same bolts and washers included.

We have made these tanks with an additional baffle near to the filler neck. This is designed to stop the common DB4 issue of fuel surging to the filler cap when cornering.

 

Aston Martin DB4 tank 3 resized

The picture here clearly shows the quality of the welding and manufacture.

Price:   £975 each (no vat to pay)

I do currently have one DB4 tank in stock.

Aston Martin DB4 Convertible twin tanks

A pair of aluminium tanks to suit the DB4 Convertible. Made to the very highest of standards and the very best available.

Aston Martin DB4 convertible tanks resized

Please note that the sender unit mount was moved to the front of the tank rather than the side of the tank at the customers request.

   Aston Martin DB4 convertible tanks 2 resized

Both the sender unit mount and the fuel pick up mount are machined fittings welded in place on the inside. These will not leak unlike other inferior tanks. The sender unit mount comes complete with x6 stainless steel allen headed retaining bolts and washers, and a new gasket. The fuel feed mount has x2 of the same bolts and washers included.

Aston Martin DB4 convertible tanks 3 resized

 

I make all of these tanks myself and I would happily compare them to any others on the market.

Price:   £795 each tank (no vat to pay).

Postage examples for the pair;

Within the UK;             £25.

Monaco;                      £82.

Aston Martin DB4 Series 5 twin tanks

AM DB4 Series 5 twin tanks

 

 

 

 

 

 

 

 

 

 

 

The above picture shows a pair of tanks made to suit the DB4 Series 5. They are a copy of the original tanks with the same extra brackets fitted.

Price:   £795 each tank (no vat to pay).

Aston Martin DB5 tank

Aston Martin DB5 tank. resized jpg

This picture shows the sender unit mount and fuel feed mount. These are both machined mounts which are welded in place on the inside, and they will not leak. The sender unit mount comes complete with x6 stainless steel allen headed retaining bolts and washers, and a new gasket. The fuel feed mount has x2 of the same bolts and washers included. Breathing tubes are mounted on the two filler necks as on the original tanks.

We have made these tanks with an additional baffle near to the filler neck. This is designed to stop the common DB5 issue of fuel surging to the filler caps when cornering.

This tank is the best available.

Price:   £975 each (no vat to pay).

I do currently have one DB5 tank in stock.

 

Aston Martin DB5 twin tanks as fitted to saloon with factory air conditioning.

These twin tanks were fitted to the DB5 saloon which had the factory air conditioning fitted. They were located in the rear wings and are different to the Volante tanks.

Both the sender unit mount and the fuel pick up mount are machined fittings welded in place on the inside. The sender unit mount comes complete with x6 stainless steel allen headed retaining bolts and washers, and a new gasket. The fuel feed mount has x2 of the same bolts and washers included.

Aston Martin DB5 twin tanks for saloon car fitted with factory air conditioning resized

 

The picture above clearly shows that these tanks are of the highest quality.

Price:   £795 each tank (no vat to pay).

Aston Martin DB6 tank

Aston Martin DB6 tank

This picture shows the sender unit mount and fuel feed mount. These are both machined mounts which are welded in place on the inside, and they will not leak. The sender unit mount comes complete with x6 stainless steel allen headed retaining bolts and washers, and a new gasket. The fuel feed mount has x2 of the same bolts and washers included. Breathing tubes are mounted on the two filler necks as on the original tanks.

We have made these tanks with an additional baffle near to the filler neck. This is designed to stop the common DB6 issue of fuel surging to the filler caps when cornering.

This tank is the best available.

Price:   £975 each (no vat to pay).

I do currently have one DB6 tank in stock.

Aston Martin DB6 Volante twin tanks

Aston Martin DB6 Volante tanks

Both the sender unit mount and the fuel pick up mount are machined fittings welded in place on the inside. These will not leak unlike other inferior tanks. The sender unit mount comes complete with x6 stainless steel allen headed retaining bolts and washers, and a new gasket. The fuel feed mount has x2 of the same bolts and washers included.

Aston Martin DB6 Volante tanks with different filler necks

Price:   £795 each tank (no vat to pay).

Aston Martin V8 carb tank 

I would happily compare this to any other on the market. Please see the  pictures below. 

This tank is unique in that it is the only replacement V8 aluminium tank that allows for fitting of the original sender unit which is retained by a locking ring. 

The tank is also unique in that it has an improved fuel pick up over the standard tank, which reduces the chance of fuel surge during cornering.  

Aston Martin v8 tank 1

                                    

Aston Martin v8 tank 3 resized

Price:   £POA  (no vat to pay).

Please note that some Aston tanks have slight differences. Below is a tank for the same as the above V8 model but with differences.

Aston Martin 1977 v8 tank 25 gallons 1 resized

 

Aston Martin 1977 v8 tank 25 gallons 2 resized

Although I don’t normally get involved with painting or different coatings for the tanks, below is a picture of a powder coated 1978 V8 tank that I have made.

Aston Martin V8 tank powder coated finish resized

Aston Martin V8 carb tank, large size.

I am the only source for a replacement aluminium tank of this shape. Please see the quality and I’m sure that you will appreciate the work involved.

am-v8

Aston Martin v8 large tank 1 resized

Aston Martin v8 large tank resize 2

Price:   £POA (No vat to pay).

Aston Martin V8 Vantage Volante

This aluminium tank is a straight swap for the standard steel tank and the best quality that you will find.

It is unique in that it is the only replacement aluminium tank that allows for fitting of the original sender unit which is retained by a locking ring. 

Price:   £POA (No vat to pay).

Aston Martin DBS tank

Aston Martin DBS1

Again, this aluminium tank is a straight swap for the standard steel tank and the very best available.

Aston Martin DBS2

It is unique in that it is the only replacement DBS aluminium tank that allows for fitting of the original sender unit which is retained by a locking ring. That sender unit mount, the two hole fuel pick up mount and the six hole mount on the top of the tank are all machined fittings welded in place on the inside. These will not leak unlike some tanks sourced elsewhere.

Aston Martin DBS3

Price:  £POA (No vat to pay).

I can make any Aston Martin tank, to any specification, including to race requirements, or the fitting of EFI.  Please contact with details.

We make all of the tanks ourselves and we are happy to post worldwide.